How Do You Put On A Ukulele Strap

So, you've bought a ukulele intending to take lessons and learning how to play. Deciding to choice up an instrument is a fun and exciting ane but you will need to equip yourself withthe right gear.

Y'all volition need to buy yourself a ukulele strap. There are different types out in that location and they all install differently. There are some straps that require you to do a little bit of drilling and others where this isn't required.

To assist you lot get your instrument upward and gear up to be played, here is a quick guide on all you lot need to know about attaching a strap.

1. Hooking On the Sound Hole

This is the nearly popular ukulele strap on the market considering it's so easy to put on. Information technology doesn't require you to do any drilling into the musical instrument at all. All you have to practice is claw it to the very bottom of the sound hole.

After you've attached it there bring it under the body of the instrument and loop information technology where it will fit over your cervix or chest. Whichever you prefer.

The only problem with using this method is that your Ukulele will flip over if you're non holding it. This shouldn't be besides much of an issue though since you'll be holding it when you play it.

2. UkeLoop

This organisation will support your ukulele a little better than hooking information technology on the audio hole. The strap volition come up with a few metal brackets that attach to the instrument by an adhesive. Over again, no drilling required.

These are a permanent office of the musical instrument once you put them on. In that location are ways to take them off merely it'south easier to leave it.

Keep in listen that you don't want to use this system if your instrument has any kind ofsleeky finish. It volition ruin information technology.

3. Ukelele Leash

If you have a ukulele with a glossy finish, don't want to put an agglutinative on information technology, or the sound pigsty method doesn't work for you then you can use a Ukelele Leash.

It looks sort of like a domestic dog leash. You'll attach the long cease to the headstock of the instrument and then put your arm through the loop on the other finish. Bring the strap over your head and behind your neck.

You'll have to support the Ukulele with your strumming arm only there is no further installation or attachments involved with this method.

4. Installing a Button

There are some straps that will require you to install buttons. These are the regular Ukelele straps and the unmarried button ones. The regular straps demand a two-betoken installation, but they are the most affordable on the market.

As the name suggests, the unmarried button straps only require a single button to be fastened. They are thought to provide a chip more than back up than the regular ones, and the toll is about the aforementioned.

For this didactics, nosotros will go over how to install buttons for a regular strap. Grab your drill and permit's get started.

Choosing the Buttons

Buttons commonly come up in black or chrome and so selection whichever suits your fancy. The just thing you lot demand to go along in heed is to brand sure that the ones you lot buy come with the screw that yous'll need. They should also include washers that provide a cushionbetween the buttons and the instrument.

Drill

Once you've got everything you need it's fourth dimension to pick up your drill and get to work. Yous'll be putting holes into the wood of your instrument to make mode for the buttons.

Look at the size of the drill bit. If information technology'south too large then the spiral will be also loose when you lot get around to installing it. If information technology's as well small then you'll cleft the woods and ruin your ukulele.

The drill bit should be the same size as the core of the screw. If it's a little bit bigger than that'southward fine likewise. If you're not sure which one to use start with something small and go up if information technology feels like information technology volition be also tight.

Lesser Button

The hole that volition house your bottom button should exist at the center bottom of the ukulele. You tin can run into where you need to put it by looking through the sound pigsty of the instrument. Most of the time in that location is a little scrap of extra wood there.

Neck Button

The wood is the thickest at the base of the neck then that's where you want to drill your pigsty. It should go along the lesser side part of the cervix. Which side depends on if you're left or right-handed.

Installation

Once you've got your holes drilled you can screw in the buttons. Use a regular hand screwdriver for this chore rather than a power one so y'all'll know if things are getting tight enough to crevice the wood.

Over again, make sure that there is a washer between the button and the ukulele to protect the forest. Later on yous've got these buttons installed you tin put on the strap.

Attaching Your Ukulele Strap

Yous must get a ukulele strap if you will use your new instrument. You could become without it merely it makes things difficult. Use this guide so you tin can chop-chop attach your strap and get on to the most important part. Learning to play.

Practise you not have a strap to become on your ukulele yet? Nothing is better than custom made. Go here toblueprint your very own.